Home › Truck Tuning › Scania › DTC Off (fault code removal)

Heavy trucks are a separate product. Scania and the other heavy-duty, agricultural and off-highway engines on this page are handled by DaVinci Deluxe Trucks · Cloud Edition — a different app, with its own engine, its own ECU catalogue and its own licence. The car software (DaVinci Deluxe · Cloud Edition) does not cover these trucks, and a car licence does not cover them either. Go to DaVinci Deluxe Trucks ›

Scania DTC Off (fault code removal)

Scania DTC Off (fault code removal) is dtc off (fault code removal) for scania. DaVinci Deluxe Trucks · Cloud Edition — our separate heavy-duty app, not the car software — delivers it entirely online: upload your original ECU read, select the service, and download the finished, checksum-corrected file — usually in minutes.

What DTC Off (fault code removal) does on a Scania

On a Scania, dtc off (fault code removal) means DTC Off (fault code removal) for Scania: removing specific diagnostic trouble codes from the ECU fault table so they stop triggering the warning light. Professional, cloud-based truck tuning by DaVinci Deluxe. A clean dashboard after a delete or repair, with no residual stored codes. Check your exac. The result is a clean dashboard after a delete or repair, with no residual stored codes. Everything is handled in the map by our engine on virgin factory files only.

Supported Scania ECUs

Scania EMS S6/S8Bosch EDC17CV

Exact ECU coverage is always confirmed before purchase — families above are commonly supported.

Common Scania models

R-SeriesS-SeriesG-SeriesP-Series

How it works

Read the original (virgin) file from your Scania with your usual tool (KESS3, CMD, PCMflash, bench or OBD).
Upload it to DaVinci Deluxe Trucks · Cloud Edition — the truck app, a separate licence from the car Cloud Edition — and tick DTC Off (fault code removal) (combine several services in one job if you need).
Download the finished file — checksum corrected automatically — and flash it back.

Tune your Scania the professional way

Heavy trucks run on DaVinci Deluxe Trucks · Cloud Edition — a separate app with its own licence and its own pricing, not the car Cloud Edition. Upload your original ECU file there and download the finished file in minutes — checksum corrected automatically, no bricking risk.

Open DaVinci Deluxe Trucks Check truck ECU coverage

Other services for your Scania

DPF Off / DPF Delete for Scania EGR Off / EGR Delete for Scania AdBlue / SCR Off for Scania Stage 1 Remap for Scania Stage 2 Remap for Scania Speed Limiter Off (VMAX) for Scania

DTC Off (fault code removal) for other makes

Volvo Trucks DTC Off (fault code removal)MAN DTC Off (fault code removal)DAF DTC Off (fault code removal)Iveco DTC Off (fault code removal)Mercedes-Benz Trucks DTC Off (fault code removal)Renault Trucks DTC Off (fault code removal)

Scania DTC Off (fault code removal) — FAQ

Is DTC Off (fault code removal) available for my Scania?

Most Scania engines are covered, but the exact ECU must always be confirmed before you buy. Load your original .bin in DaVinci Deluxe Trucks — the separate truck app — or check the truck supported ECU list. The file analysis in the truck app is free and shows exactly which solutions exist for your software version. The car list and the car trial do not apply to heavy trucks.

Do I need to remove the ECU?

No. You read the original file with your usual tool (KESS, CMD, PCMflash, bench or OBD), upload it to DaVinci Deluxe Trucks · Cloud Edition (the truck app, not the car one), tick the service you need, and flash the file we return. The checksum is corrected automatically.

Is it safe for the truck?

The engine works only on the original, virgin factory read and returns a checksum-corrected file, so there is no bricking risk when you follow the normal read/flash procedure with a valid original.