DTC OFF: when I select DTC OFF and choose the DTCs, do I have to activate readiness also?

Usually no. You only need readiness if the car must pass an OBD/inspection that checks readiness monitors and those monitors won’t complete normally (often when systems like DPF/EGR/SCR are disabled/removed). Otherwise, DTC OFF alone is enough.

Ok, when do I need to activate readiness?

Only when the car must pass an OBD/inspection that checks readiness monitors, and those monitors won’t complete normally because a system is disabled/removed (commonly DPF/EGR/SCR). Otherwise, don’t enable readiness.

After saving, the switches show blue 'ON' again when I reopen the file — is this normal?

This is normal: the interface displays certain switches as 'ON' by default when a file is initially opened. This does not mean the modification was reverted. The changes are already embedded in your saved file. Check the final status in the results area / right-side list.

FAQ & Support — DaVinci Deluxe

Tuning na Cloud & Tuning na Ci gaba

Ta yaya zan yi amfani da Tuning na Cloud? (mataki-mataki)

Mafi sauri — WhatsApp: aiko fayil ɗinka na asali .bin/.ori/.hex zuwa WhatsApp ɗinmu, ka gaya mana ECU (alamar + samfur) da kuma ayyukan da kake so (DPF, EGR, AdBlue, DTC OFF, Mataki 1…). Muna sarrafa shi sannan kuma mu tura fayil ɗin da aka tuned a cikin tattaunawar.

Gidan yanar gizo — Cloud Vault:

Shiga kuma buɗe Profil → Cloud Vault.
Mataki na 1 — zaɓi Nau'in Aiki: MODULE (DPF / EGR / AdBlue / DTC / IMMO) ko TUNING (Mataki 1, Mataki 1+, Pops & Bangs).
Mataki na 2 — zaɓi ECU naka (alamomi + samfur, misali Bosch EDC17C50).
Mataki na 3 — zaɓi sabis ɗin da kake so (za ka iya zaɓar da yawa).
Loda na asali, wanda ba a canza ba fayil ka tura.
Tsarin mu yana sarrafa shi ta atomatik kuma yana dawo da fayil ɗin da aka gyara a Vault ɗinka + imel + sanarwar WhatsApp (yawanci cikin mintuna).

Farashi: Shirye / Tsare-tsaren Watan / Shekara suna samun Cloud Tuning kyauta. Tsarin da kuma fakitin 24h suna biya a cikin tikiti (1 tikiti = €1; DPF/EGR/AdBlue/DTC = 9 tikiti). Ko da yaushe loda fayil ɗin asali, kada ku taba loda wanda aka karya ko wanda aka canza.

DTC OFF & Readiness

DTC OFF: lokacin da na zaɓi DTC OFF kuma na zaɓi DTCs, shin yana da tilas in kunna readiness ma?

Yawanci a'a. Kana buƙatar readiness ne kawai idan motar ta saɓa da OBD/ bincike wanda ke duba na’urorin readiness kuma waɗannan na’urorin ba za su kammala daidai ba (yawan lokacin lokacin da tsarin kamar DPF/EGR/SCR an kashe / an cire). In ba haka ba, DTC OFF kaɗai ya isa.

To, yaushe zan buƙaci kunna readiness?

Kawai lokacin da motar ta saɓa da OBD/ bincike wanda ke duba na’urorin readiness, kuma waɗannan na’urorin ba za su kammala daidai ba saboda wani tsarin an kashe / an cire (kamar DPF/EGR/SCR). In ba haka ba, kada a kunna readiness.

Gyaran Matsala

Bayan ajiye, makullin suna nuna shuɗi 'ON' sake lokacin da na sake buɗe fayil ɗin - shin wannan al'ada ne?

Abin da kake gani:

Bayan aiwatar da mafita (misali, DTC OFF / DPF / EGR / AdBlue), ka ajiye fayil ɗin.
Lokacin da ka sake buɗe fayil ɗin, wasu makullin suna bayyana a matsayin shuɗi 'ON' sake.
Kana tsammanin cewa an yi kuskuren aiwatar da canjin.

Abin da hakan ke nufi:

Wannan al'ada ne: tashar tana nuna wasu makullin a matsayin 'ON' bisa tsoho lokacin da aka bude fayil a farko.
Wannan ba yana nufin an dawo da canjin ba. Canje-canjen sun riga sun kafu a cikin fayil ɗin da ka ajiye.
Idan ka danna makulli ɗaya a karo na biyu, LOG yana iya nuna komai sabo saboda aikin an riga an aiwatar dashi a lokacin ajiye na farko.

Yadda za a tabbatar:

Duba matsayin ƙarshe a yankin sakamakon / jerin gefen dama: modules da aka sarrafa yawanci suna bayyana a matsayin 'OFF' (yawan lokaci a ja) lokacin da aka kashe su da nasara.
DTCs da aka riga aka share/aka gudanar ba za su sake rubutawa a matsayin 'sabo' a cikin LOG ba.
Idan kana da shakka, ka kwatanta 'kafin/bayan' ta amfani da yankin yanayi, ba tare da duba launin masu canji kawai ba lokacin sake loda.

✅ Jerin Duba Tabbatarwa:

Bude fayil din asali, yi amfani da maganin, sannan ka ajiye.
Bude fayil din da aka adana (da aka gyara) a sake.
Kada ka dogara kawai kan maballin shuɗi 'ON' lokacin sake loda (wannan kawai yanayin UI ne).
Duba jerin/matsayi a gefen dama: abubuwan da aka gudanar ya kamata su bayyana a matsayin 'OFF' kai tsaye.
Tabbatar da cewa LOG ba ya ƙara shigar da bayanai marasa ma'ana idan ka yi wannan aikin a sake (domin an riga an aiwatar da shi).
Idan ya zama dole, gwada akan wani DTC daban gaba ɗaya don ganin sabon ƙari a cikin LOG.

Lura: Yi amfani da waɗannan aikace-aikacen kawai don amfani na doka da kuma bisa ga dokokin gida.

Sanya & Sabuntawa

Ta yaya zan sabunta software ɗina zuwa sabon sigar?

Software yana duba sabuntawa ta atomatik lokacin ƙaddamarwa. Hakanan, zaka iya shiga cikin dashboard ɗin yanar gizonka ka sauke cikakken sabuntaccen ajiyar.

Lasisi & Asusun

Shin zan iya shigar da software akan kwamfuta da yawa?

Tsawon Lokaci na Kawaida, Mai Mahimmanci ba tare da iyaka kowane wata ba, da Lasisi na Awanni 1 an takaita ga PC 1 a lokaci ɗaya. Pro Tsawon Lokaci da Mai Mahimmanci a Shekara yana ba da damar har zuwa PCs 5.

Farashin Cloud Tuning

Nawa ne farashin Cloud Tuning?

Ayyukan hayaki da na kashe module suna KYAUTA a kowane plan: DPF off, EGR off, AdBlue off, DTC off, Lambda, NOX, FLAPS da makamantan ayyukan kashe module ba sa kuɗin komai.

Matakan haɓaka ƙarfi suna amfani da kiredit na tuning — Stage 1, Stage 1+, Pops & Bangs, Launch Control, E85 da Eco Tune. Farashin kiredit: 1 kiredit = 20 €, 5 = 90 €, 10 = 170 €, 20 = 300 €. Stage 1 da Stage 1+ kaɗai ake samu a Cloud Tuning (babu Stage 2 ko Stage 3).

Shin DPF / EGR / AdBlue / DTC off kyauta ne?

Ee. Duk ayyukan hayaki da na kashe module suna kyauta a kowane plan (Tikitin Sa'o'i 24, Na Wata da Na Shekara). Kana kashe kiredit na tuning ne kawai a matakan haɓaka ƙarfi kamar Stage 1 da Stage 1+.

Wadanne kiredit na tuning ne plan dina ke haɗawa?

Na Shekara (1009 €/yr) — kiredit na tuning 20 lokacin yin rajista (ba sa taɓa ƙarewa) + kiredit 4 kyauta kowane wata, fayiloli 25/rana, tallafin VIP 24/7.
Na Wata (100.99 €/mo) — kiredit 2 kyauta kowane wata, fayiloli 15/rana.
Tikitin Sa'o'i 24 (45.99 €) — Awanni 24 na AIKI na gaske — agogon yana gudana ne kawai yayin da kake aiki kuma yana dakatar da lokacin idan ka tsaya ko ka rufe manhajar (rufe manhajar ba ya cinye maka lokaci). Yi amfani da awanni 24 naka a cikin kwanaki 30 daga farkon ka. Ya dace da aikin lokaci guda.

Masu biyan kuɗin Na Wata/Na Shekara da suke ci gaba da biyan kuɗi ba tare da katsewa ba suna riƙe da Cloud Tuning marar iyaka. Kana iya sayen ƙarin kiredit a kowane lokaci daga Cloud Vault → Sayi Kiredit.

Idan aikin Cloud Tuning na ya gaza, za a caje ni?

A'a. Ayyukan hayaki koyaushe kyauta ne, kuma idan aikin matakin haɓaka ƙarfi ba za a iya sarrafa shi ta atomatik ba (misali, girke-girke na ECU naka na musamman bai riga ya kasance a cikin katalogin mu ba), ana mayar da kiredit da aka ajiye don aikin nan atomatik zuwa ma'aunin asusunka.

Ana bayar da mayarwar kuɗi a matsayin ma'aunin Cloud Tuning — ba a matsayin tsabar kuɗi ba. Duba Manufar Mayar da Kuɗi namu don cikakkun sharuɗɗan.

Daidaici & Bukatu

Menene bukatun tsarin?

DaVinci Deluxe · Cloud Edition yana aiki da kyau akan Windows 10 da Windows 11 (64-bit). Ana buƙatar haɗin intanet mai aiki don tantance lasisninka lokacin bude.

Tsaro & Gidan Yanar Gizo hukuma

Shin ina cikin haɗarin lalata ECU na?

DaVinci Deluxe · Cloud Edition yana canza fayilolin ECU Dump cikin hikima yayin kare tsarin taswirar. Duk da haka, rubuta waɗannan fayilolin a cikin ECU a bisa tsaro yana cikin nauyin mai amfani kuma yana dogara da kwanciyar hankali na kayan aikin wutar lantarki na gidan aikinka.

FAQ / Tushen Ilimi