Ford Stage 2 Remap
Ford Stage 2 Remap is stage 2 remap for ford. DaVinci Deluxe · Cloud Edition delivers it entirely online: upload your original ECU read, select the service, and download the finished, checksum-corrected file — usually in minutes.
What Stage 2 Remap does on a Ford
On a Ford, stage 2 remap means Stage 2 Remap for Ford: a remap matched to supporting hardware upgrades (downpipe, intake, intercooler). Professional, cloud-based car tuning by DaVinci Deluxe. A bigger power and torque gain than stage 1 for modified vehicles. Check your exact ECU before you buy.. The result is a bigger power and torque gain than Stage 1 for modified vehicles. Everything is handled in the map by our engine on virgin factory files only.
Exact ECU coverage is always confirmed before purchase — families above are commonly supported.
Popular Ford models we tune: Fiesta, Focus, Kuga, Mondeo, Transit and Ranger — from the 1.5 and 2.0 TDCi diesels to the 1.0 and 1.5 EcoBoost petrols. Whether you drive a Fiesta or a Focus, the Stage 2 remap is matched to the exact ECU and software in your Ford, never a generic file. Send us the model, year and engine and we confirm coverage before you pay.
How it works
- Read the original (virgin) file from your Ford with your usual tool (KESS3, CMD, PCMflash, bench or OBD).
- Upload it to DaVinci Deluxe · Cloud Edition and tick Stage 2 Remap (combine several services in one job if you need).
- Download the finished file — checksum corrected automatically — and flash it back.
Tune your Ford the professional way
Upload your original ECU file to DaVinci Deluxe · Cloud Edition and download the finished file in minutes — checksum corrected automatically, no bricking risk.
Try Cloud EditionCheck ECU coverageOther services for your Ford
Stage 2 Remap for other makes
Ford Stage 2 Remap — FAQ
Is Stage 2 Remap available for my Ford?
Most Ford engines are covered, but the exact ECU must always be confirmed before you buy. Upload your original .bin to Cloud Tuning, check the supported list, or run the Real Software Test (€9.99) to verify your specific ECU. (€9.99 for the first 7 days, then Monthly Unlimited starts automatically at €100.99/month unless you cancel — your first monthly invoice is €91.00 because the €9.99 comes off it. Payment card required. Cancel anytime in one click.)
Do I need to remove the ECU?
No. You read the original file with your usual tool (KESS, CMD, PCMflash, bench or OBD), upload it to DaVinci Deluxe · Cloud Edition, tick the service you need, and flash the file we return. The checksum is corrected automatically.
Is it safe for the vehicle?
The engine works only on the original, virgin factory read and returns a checksum-corrected file, so there is no bricking risk when you follow the normal read/flash procedure with a valid original.